Easy Speed 100ml
Easy Speed increases the speed and spin performance of your rubber.
HOW TO USE Easy Speed
Easy Speed is not a glue. It’s a substance that boosts your rubber to increase speed, spin and sound.
Use Easy Speed with a new rubber (not pre-treated or glued). Keep the rubber in its original square shape.
After treatment with Easy Speed you attach the rubber to the blade with a water based glue, for example Andro Free Glue (in accordance with ITTF regulations).
Apply a layer of Easy Speed to the sponge side of the rubber. Use the included applicator and apply evenly all over the surface.
Allow to dry for around 5 –10 minutes, depending on the thickness of the layer of Easy Speed applied and the room temperature.
Repeat steps 1 and 2 between 3 – 5 times, depending how large an effect you are looking for.
The rubber now starts to curl up, and has to “rest”. After around 48 hours the rubber is flat again.
Now you can attach the rubber to the blade. Use Andro Free Glue, and dry allow it to dry thoroughly.
The speed and spin effect will last between 2 & 3 weeks, after which it will gradually disappear.
When the effect has gone you can repeat the treatment, and again get the improved speed and spin effect.
Now you only have to apply 2 – 3 layers of Easy Speed.
ADDITIONAL ADVICE:
It is important not to hurry, each layer must dry thoroughly. The rubber should be completely dry before you apply the next layer.
